Manufactured from mill-certified EN 1.4301 (AISI 304) and EN 1.4016 (AISI 430) coil. Engineered with precise draw ratios, seamless hygienic radii, and crack-free corner tooling.
Heavy-gauge AISI 304 GN trays with anti-jamming stack rims. Built for intense thermal cycling in Polish commercial kitchens and HORECA food warmer units.
Get Catalog
Precision CNC-perforated baking trays designed for rapid air heat exchange. Ideal for automated bread and pastry production facilities across Mazowieckie and Greater Poland.
Get Catalog
Seamless deep-drawn transport trays designed to withstand cryogenic freezing and high-pressure caustic washdown cycles in Polish meat packing plants.
Get Catalog
Ultra-smooth surface finish (Ra < 0.4 µm) eliminate bacterial traps. Built for medical device sterilization and chemical cleanroom environments in Silesia.
Get Catalog
Stamped ferritic stainless steel induction plates engineered for thermal bonding to aluminium catering trays and chafing dishes, enabling fast induction warming.
Get Catalog
Rigid framed wire mesh and punched plate trays designed for commercial agricultural dryers in the Lublin and Łódź food processing corridors.
Get Catalog
Tailor-made stainless components stamped from custom dies. Developed directly from your CAD drawings or physical prototypes with tight drawing tolerances.
Get Catalog
Aesthetic, mirror-finished display trays designed for Polish retail supermarket chains (Dino, Biedronka suppliers) and delicatessen counters.
Get CatalogAn authoritative analysis of stainless steel grade selection, tooling physics, and sanitary compliance for European B2B procurement directors.
For Polish food processing plants, commercial kitchen distributors, and industrial equipment manufacturers, selecting the correct stainless steel alloy directly impacts both initial procurement capital expenditure and long-term total cost of ownership (TCO). As a direct manufacturer, our metallurgical engineering team controls chemical composition and grain refinement right at the coil slitting level:
| Metallurgical Property | EN 1.4301 (AISI 304) | EN 1.4404 (AISI 316L) | EN 1.4016 (AISI 430) |
|---|---|---|---|
| Microstructure Class | Austenitic (Non-magnetic) | Austenitic (Non-magnetic) | Ferritic (Ferromagnetic) |
| Chromium (Cr) / Nickel (Ni) | 17.5–19.5% Cr / 8.0–10.5% Ni | 16.5–18.5% Cr / 10.0–13.0% Ni | 16.0–18.0% Cr / < 0.75% Ni |
| Molybdenum (Mo) Content | — | 2.0–2.5% Mo | — |
| Tensile Strength (Rm) | 500 – 700 MPa | 500 – 700 MPa | 450 – 600 MPa |
| Yield Strength (Rp0.2) | ≥ 210 MPa | ≥ 220 MPa | ≥ 280 MPa |
| Deep Drawing Elongation (A50) | ≥ 45% (Exceptional) | ≥ 40% (High) | ≥ 20% (Moderate) |
| EU Food Contact Standard | EN 1935/2004 Approved | EN 1935/2004 Approved | EN 1935/2004 Dry Contact |
Producing deep stainless steel trays without micro-tears, wall thinning, or flange wrinkling requires precise mechanical force control during press operations. Our manufacturing plants utilize 500-ton to 1200-ton hydraulic presses equipped with multi-axis hydraulic cushions:
Surface roughness (Ra) is a critical compliance metric under Polish Sanitary Inspectorate (GIS) audits. Our factory offers three distinct finishing lines tailored to client specifications:
Tailored stainless tray solutions engineered for the specific operational demands of Poland’s key economic regions and manufacturing clusters.
Greater Poland (Poznań) hosts some of Europe's largest industrial bakeries. We supply high-tensile, perforated EN 1.4016 baking sheets with rolled wire rim reinforcement that prevent thermal warping when cycling between -20°C proofing rooms and +280°C tunnel ovens.
Supporting Warsaw's booming food service market, catering equipment distributors receive custom-branded GN 1/1, 1/2, and 1/3 containers featuring smooth rolled edges for safe handling, compatible with major European combi-steamer brands (Rational, MKN).
Heavy-gauge stainless steel washing and parts-holding trays engineered with specific perforation patterns for ultrasonic degreasing of precision automotive gears and pharmaceutical vial handling in Silesian factories.
For fish processing operators in Gdynia and Szczecin, our EN 1.4404 (316L) seamless deep-drawn trays withstand aggressive brine solutions, salt exposure, and blast freezing down to -45°C without embrittlement.
Custom-fabricated stainless steel mesh baskets and insert trays manufactured to tight tolerances for aerospace component solvent cleaning and heat treatment lines near Rzeszów.
Mirror-polished display trays engineered for high visual appeal in fresh meat and cheese display cases for national Polish grocery chains, featuring spill-proof raised rims.
Strategic shifts in the Polish manufacturing landscape shaping OEM component purchasing strategies for 2026–2030.
With rising labor costs in Poland, major food producers are upgrading to fully automated pick-and-place robot lines. This demands highly uniform tray dimensions with tight tolerances (±0.2mm) to prevent sensor misfeeds and machine stoppage. Our CNC die stamping delivers absolute dimensional repeatability across 100,000+ unit production runs.
Polish buyers are moving away from uncertified suppliers toward OEMs offering full batch-level traceability. Strict enforcement of EU 1935/2004 and German LFGB food contact standards requires certified raw materials free of heavy metal contamination (Lead, Cadmium, Nickel leaching control), fully documented via Mill Test Reports (MTRs).
Poland's position as Central Europe's primary logistics corridor (A2/A1 motorways) has spurred massive growth in cold storage distribution centers. Demand for stackable, heavy-duty stainless freezing trays that resist thermal shock cracking and optimize palletization density has surged by 40% year-over-year.
Polish enterprise procurement policies increasingly prioritize recyclable materials over single-use or short-life plastics. Our stainless steel trays are fabricated from up to 75% recycled steel scrap and are 100% recyclable at end-of-life, supporting corporate ESG targets and European Green Deal guidelines.
Fifty years of precision press-working excellence backing your supply chain security.
Operated from our primary manufacturing base in Mumbai and supported by our expanded sister unit (Mammal Industries in Sarigam, Gujarat). This dual-facility infrastructure ensures surge capacity during peak quarter procurement and guarantees 100% supply continuity.
We cut, maintain, and modify all drawing dies internally using high-precision CNC spark erosion and EDM machining. Your custom tray designs, embossed logos, and specialized corner configurations remain strictly confidential under non-disclosure agreements.
Located just 35 km from JNPT Port (India's premier container gateway), we offer fast FCL/LCL ocean shipping direct to Baltic ports (Gdansk, Gdynia). Complete export clearance packages include EUR.1 documentation, Form A, Certificate of Origin, and accurate TARIC/HS coding.
Clear, direct answers regarding custom tooling, European food contact standards, logistics, and payment terms.
Yes. All stainless steel trays engineered for food contact applications are manufactured exclusively from certified EN 1.4301 (AISI 304) or EN 1.4404 (AISI 316L) alloys. Every shipment includes a formal Mill Test Report (MTR) verifying chemical composition and confirming zero migration of harmful heavy metals, fully compliant with EU 1935/2004, EDQM guidelines, and Polish PZH (National Institute of Public Health) standards.
For custom tray dimensions or OEM pressings, tooling engineering and die fabrication require approximately 15 to 22 business days. First-article inspection samples are dispatched via express air courier (DHL/FedEx) to Poland within 4 days for your physical approval and dimensional verification. Once approved, mass production runs at 5,000 to 20,000 units per week depending on geometry.
Our stainless steel trays and pressings are classified under standard European customs TARIC codes: HS Code 7323.93.00 (Table, kitchen or other household articles of stainless steel) or HS Code 7326.90.98 (Other articles of iron or steel, stamped/deep-drawn). We provide all documentation necessary for smooth customs clearance through Polish port authorities in Gdańsk or Gdynia.
Thermal warping occurs when residual drawing stresses relax under heat. We eliminate this by implementing stress-relief thermal conditioning on heavy-gauge trays, using high-tensile mill-annealed coil, and incorporating perimeter stiffening ribs or rolled wire rims. This ensures baking trays remain flat up to +300°C and freeze trays maintain structural integrity down to -45°C.
For standard European Gastronorm sizes (GN 1/1, 1/2, etc.), our flexible MOQ starts at 500 units per item. For complete custom tray geometries requiring new tooling, MOQ is determined by metal thickness and blank size—typically ranging between 1,000 and 3,000 units. We actively support pilot production runs for product qualification.
Each tray is interleaved with non-abrasive protective paper or PE film to prevent surface scratching. Trays are packed into heavy-duty 5-ply corrugated export cartons and strapped onto ISPM-15 heat-treated fumigated wooden pallets or ISPM-compliant plastic pallets suitable for high-bay warehouse racking systems across Poland.
Submit your engineering drawings, target dimensions, or CAD files directly to our OEM technical engineering team. Receive detailed pricing, die amortizations, and material certificates within 24 hours.
