SS 430 induction base plates, pressure cooker parts, deep-drawn vessels and steamer plates — stamped in-house for cookware brands in India, the EU, Turkey, Vietnam and the UAE.
Every part below is cut, drawn, embossed or perforated inside our own plants — no job-work chain, no third-party toolroom. Specifications are set by your drawing, not by our catalogue.
Ferritic discs for fry pans, tawas, kadhai, sauce pans and cooker bodies. Bonding integrity is decided at the stamping stage — flatness within tolerance is what stops delamination after two years of heat cycling.
SS 430 · Any diameter · Any hole pattern · Weld-ready
Induction plate capability →Lids, base discs, gasket and support rings for bodies rated at 1–2 bar differential. These parts absorb the pressure cycle thousands of times, so dimensional drift becomes a safety issue, not a cosmetic one.
SS 304 / SS 430 · Flat · Dome · Embossed
Pressure cooker parts →
The component the end user touches on every single use. A precision rolled rim seats cleanly against the vessel and reads as premium build quality; a rough one devalues the whole product.
Rolled rim · Dome or flat · Tri-ply compatible
Rice cooker inner pots, mixing bowls, kettle liners and housings drawn seamlessly from blank. Wall-thickness consistency after the draw decides whether the vessel dents in week one of hotel-kitchen service.
Seamless draw · Multi-stage tooling · Tight tolerance
Cavity plates and perforated inserts for idli, mini-idli, dhokla and multi-kadai systems. Uniform open area is what keeps steam flow even — uneven perforation shows up as undercooked output, blamed on the appliance.
Custom cavity count · Perforated or plain · Stackable
Bar trays, bread baskets, dome covers, measuring bowls and fryer baskets for hotels, banquet kitchens and cloud kitchens — engineered for commercial dishwasher cycles, not domestic use.
SS 304 · Mirror or matte finish · Bulk OEM
Hospitality range →These are reference patterns from live OEM programmes, not a fixed product list. Hole geometry, open-area ratio and emboss depth are engineered around your bonding method and cooktop coil diameter.
Inserts and formed plates developed around your vessel diameter, cavity layout, perforation format, rim profile and stacking height — from first-article sample to repeat monthly supply.
Deep-formed cavities with repeatable depth, pitch and stack clearance. Cavity count, plate diameter and cavity volume are all set by your appliance geometry, so batches remain interchangeable across production years.
6-cavity · 7-cavity · mini-idli · custom pitch
Plain and perforated inserts for steaming, dhokla and multi-purpose use, plus concentrically formed dough-kadai plates. Open-area percentage and edge profile are matched to your lid seal and vessel taper.
Plain · Perforated · Formed profile · Stackable
Four core press operations, three material grades and a complete in-house toolroom. The same equipment that supplies India's cookware brands also produces railway and engineering stampings.
The first cut behind every disc and lid blank. Edge burr and diameter consistency here determine whether downstream drawing and bonding stay within tolerance across runs of tens of thousands.
Where a plain blank becomes a functional part — induction contact patterns, brand logos, grip textures and capacity markings pressed in a single controlled stroke.
Flat sheet to seamless bowl, liner or housing with no welds. Multi-stage dies and controlled blank-holder pressure keep wall thickness even through the full draw depth.
Parallel press lines for volume programmes. Because dies stay on our floor, your design never waits in a third-party toolroom queue and unit cost falls as volume rises.
Four stages, one owner of the outcome. No bulk run starts until your first article is signed off.
Send a drawing, a datasheet or a physical sample. Our toolroom confirms feasibility, material grade and draw ratio before any commitment is made.
Dies and punches are designed and cut on our own floor. Faster iteration, lower tooling cost, and your geometry never leaves our control.
Sample batch produced with dimensional inspection report and mill test certificate for your incoming QC and compliance file.
Scheduled volume production across Mumbai and Sarigam, with batch traceability and export documentation packed per shipment.
Founded in Mumbai in 1974 as a family-run precision components business. Our name never appears on the finished product — which is precisely why brands trust us with it.
Buyer coordination, OEM development, toolroom, sampling and stainless steel component production. Single point of contact for every procurement relationship. GSTIN 27AAACJ9826****.
Sister concern providing extended capacity for larger OEM volumes, repeat cycles and white-label programmes. Village Manda, Nargol Road, Sarigam 396155. GSTIN 24AARFM9084****.
Drawings, tooling, approval and bulk output are managed as a single programme. The Gujarat unit operates as production capacity, not a separate sales entity — your schedule stays protected during peak season.
Induction compatibility is a magnetic property, not a marketing claim. This is the comparison most sourcing teams need before approving a base-plate material.
| Property | SS 430 (our induction grade) | SS 304 | Mild Steel |
|---|---|---|---|
| Standard | EN 1.4016 · AISI 430 | EN 1.4301 · AISI 304 | IS 2062 · ASTM A36 |
| Induction compatible | Yes — ferritic | No — austenitic | Yes |
| Magnetic permeability | High | Low | High |
| Corrosion resistance | High | Very high | Low — requires coating |
| Tensile strength | 430 – 600 MPa | 515 – 720 MPa | 400 – 550 MPa |
| Yield strength (0.2%) | ≥ 260 MPa | ≥ 205 MPa | ≥ 250 MPa |
| Elongation (A50) | ≥ 22% | ≥ 40% | ≥ 20% |
| Chromium content | 16 – 18% | 18 – 20% | < 0.3% |
| Deep-draw formability | Excellent | Excellent | Good |
| Food contact suitability | Yes — EN 1.4016 | Yes | Coating required |
Induction hobs generate heat by inducing eddy currents in ferromagnetic material. SS 304 is effectively non-magnetic and will not heat on a coil. SS 430 supplies the magnetic response, while the aluminium body above it delivers rapid, even heat spread. Substituting SS 201 or uncertified coil is the most common cause of field failures we are asked to correct — we source traceable SS 430 only and release mill test reports per batch.
Full SS 430 specification guideServiceware and kitchen components specified for commercial duty cycles — hundreds of dishwasher passes a week, not domestic occasional use. Bulk OEM supply, direct from the press floor.
Rolled-edge trays that stay presentable through high-frequency service and machine washing.
SS 304 · Custom size · Bulk OEM
Consistent perforation prevents warping under dishwasher heat, service after service.
Deep drawn · Perforated · Stackable
Embossed graduations that stay legible and dimensionally accurate after years of scrubbing.
Deep drawn · Embossed · Bakery grade
Deep wire-mesh construction with long loop handle for controlled lifting and draining in QSR lines.
Wire mesh · Custom diameter
Integrated centre bowl so snack and dip travel as one coordinated piece on buffet and lounge service.
Formed centre bowl · Custom size
Tight-fitting domes with clean mirror finish for banquet plating and room-service transit.
Dome stamped · Mirror finish
Supplying hotels, restaurants, cloud kitchens and bars across India and export markets. Custom dimensions, direct-from-manufacturer supply, no trading intermediaries.
Explore hospitality productsWe manufacture for the companies whose name goes on the box — and we deliberately never name them. White-label supply means your vendor base stays your competitive advantage.
Base plates, drawn bodies and lids for fry pans, kadhai and tawas — bonded correctly, batch after batch.
Lids, gasket rings, support rings and base discs engineered for repeated pressure cycling and long warranty terms.
Bowls, trays and serving components stamped and drawn to your catalogue dimensions and finish standard.
Your branding, never ours. Complete export documentation for EU, Turkish, Vietnamese and Middle East customs.
Commercial-duty serving and kitchen components for hotel groups, caterers and institutional kitchens.
Stainless and mild steel parts for rice cookers, electric multi-cookers and small-appliance assemblies.
Certificate of Origin · commercial invoice · packing list · MTRs · JNPT Port, Mumbai — 35 km from plant · buyer-nominated forwarders accepted.
What procurement, quality and compliance teams ask before releasing a first order.
Induction cooktops heat by inducing eddy currents in ferromagnetic material. SS 304 is austenitic and effectively non-magnetic, so it will not heat on a coil. SS 430 is ferritic, supplying the magnetic permeability required for induction alongside corrosion resistance and deep-draw formability — which is why it is the global standard for discs bonded to aluminium bodies.
Yes. All dies are designed and cut in-house from your engineering drawing, datasheet or a physical part. Diameter, gauge, centre hole, perforation layout, edge profile and logo embossing are buyer-defined. We are a build-to-print OEM manufacturer, not a fixed-catalogue vendor.
Yes. Mill test reports confirming chemical and mechanical properties of the SS 430 or SS 304 coil used in your run are supplied on request, with batch-level traceability for customs clearance, compliance audits and incoming inspection.
We supply the European Union, Turkey, Vietnam, the UAE and North America alongside India's cookware clusters. Shipments include Certificate of Origin, commercial invoice, packing list and correct HS classification — 7220 9090 for circle-cut blanks, 7326 9099 for finished stamped components. JNPT Port is 35 km from the Mumbai plant.
MOQ is structured around geometry, tooling status and your production timeline rather than a fixed figure — from first-article qualification through to recurring monthly programmes. Lead times are confirmed after drawing approval; two plants allow parallel scheduling during the September–March peak season.
Yes. Components are produced strictly to your product specification, your tooling is reserved for your programme, and our name appears on neither product nor packaging. We do not sell finished cookware under our own brand, so we never compete with our customers.
Yes. Both the Mumbai plant and the Sarigam, Gujarat unit are open to procurement and quality teams for process walkthroughs, toolroom review and material traceability demonstrations. We have manufactured continuously since 1974 and prefer buyers verify that in person.
